We had to give a preview today. We didn’t have much we wanted to show at the moment, so we put some things together exclusively for the preview.

…To continue reading (and for more pics), click here!

i wasn’t planning on blogging this so i don’t really have pics during the actual work.

the problem: not all 4 of my speakers were outputting sound. i have a 4.1 system and it’s divided into two plugs — one for the front 2, one for the rear 2 speakers. i could wiggle the wires and sometimes the other speaker would kick in, so i knew there was a break near the plug. it’s a pretty common problem caused when the cord is bent too much and the wire inside breaks.

how to fix: going down the cord from the plug bending the wire in different ways, i pinpointed where the break was. for both cords, it was within 2 inches of the plug. now the scary part… snipping the cord on my speaker system. i had done a practice run on a pair of cheap headphones that came with a $5 mp3 player, but i knew they wouldn’t be the same.

…To continue reading (and for more pics), click here!